KNX Dali Gateway
I have some some dimming lights (controlled buy dali gateway), they are programmed in ETS and working fine.
Now i'm trying to control theme with comfort click without succes.
I have the following adresses:
3/4/0 switch (switch)
3/4/1 dimming (dimming control)
3/4/2 value (percentage 0-100%)
3/4/3 status (switch)
I used in comfort click the following adress:
Address: 3/4/0 switch
status address: 3/4/2
resutl:
the slide goes directly back to 0
the light does nothing
Sorry Dave. Did not see your reply.
What I can see from the screenshot, you have linked group address 2/3/4 to several objects both absolute dimming value and two status objects.
In ETS, do the following. Unlink group address 2/3/4 from object 49, Absolute dimming and link a new free group address, ex 2/3/5. In Comfortclick and set the new group address as address ex 2/3/5 in this example and 3/0/0 as status address. If it doesn’t work you may also try 2/3/4 as status address.
Hope it will work for you!