KNX Remote Programming through Jigsaw

Fatlum Telaku

3 years ago
updated 2 years ago
Under review

In the new version of bOS configurator(4.9.23) there is the option for "KNX Remote Programming", which from what I understood means that we don't need a forwarded port because we can program our KNX devices remotely only through Jigsaw normally with a provided gateway.
I have tried it many times and the problem is sometimes it works and other times it doesn't. So, my question is, is this feature on testing phases or am I configuring anything wrong. To be specific most of the times it just shows the "Disconnected" sign, like in the picture attached.

Thanks in advance.

Replies 5

Newest first
Newest first Oldest first

ComfortClick Support

2 years ago

Hello Pedro,

the problem should already be resolved.

Best regards,

Reply Link

Pedro Jorge

Thanks for quick answer

Hello Pedro,

we are aware of the remote programming issue and are resolving it.

Best regards, David

Hello Im running CC 4.9.40 and Remote Progaming is not working with ETS5 any know issue ? Had worked previsuly

ETS connects but there is no traffic

Thank you

3 years ago
Under review

Hello Fatlum,

the remote ETS programming in the 4.9.23 is a first iteration of this function so for the most part it should be working normally, but some disconnects here and there may occur. We've fixed many issues already and with a new update, the whole process is going to be more stable and reliable.

Best regards.