I have some some dimming lights (controlled buy dali gateway), they are programmed in ETS and working fine.
Now i'm trying to control theme with comfort click without succes.
I have the following adresses:
3/4/0 switch (switch)
3/4/1 dimming (dimming control)
3/4/2 value (percentage 0-100%)
3/4/3 status (switch)
I used in comfort click the following adress:
Address: 3/4/0 switch
status address: 3/4/2
resutl:
the slide goes directly back to 0
the light does nothing
Hi Frederik,
Thanks for your reply, the slider works in comfort click, it respons/reports when i use the hardware push buttons.
BUT, when i want to control the light using comfort click the slider slides, but the lights remain off.
Even when i use the hardware button to turn the light on and use comfort click to change the dimming% the lights don't respond.
Hi Dave.
You should use 3/4/2 as address and set the status address to the status object for (0-100%) not the switch object.
You can also try it without status address but will not get the status back from KNX-bus.
What is your DALI Gateway ? On mine i have 5 nodes :
1/ Switch
2/ Status
3/ Light Level
4/ Light value
5/ Variation
My setting (working fine in bOS) is control with "light level" and feedback "light value".
Looking more in details of the ETS way of programing your Gateway might help.
Regards,