Hi,
I would like to be able to connect a Shelly with ComfortClick.
I think the best way was to use an HTTP Device.
But I am not able to configure. Is there an example for me to base myself on?
To make Shelly on / off, just roll a link and to know its status just access a link in JSON.
Thanks
Hello Everyone. I am also tryng to integrate Shelly devices. So far so good with commands and status following the instrcutions that you shared here. Thanks . I am wondering how to integrating devices like shelly button and door switchs that sleep most of the time and we can not send a GET command. Is there any way to lesson to the message that is sent only when device wakes? That means when someone press the button or a door is opened . Thanks in advance
Hi Pablo,
I also prefer Modbus TCP. My initial question was related more with general home automation like ; wall switches , lights , Shutters etc.. What i understand is that your experience in Home automation was about air conditioning.
Thank you , have a nice day.
MDias
Hi Manuel,
I understand that when you say without a BUS, you mean MODBUS RTU. I have been doing it for TCP for many years. It is more comfortable for me but it is also necessary to physically communicate them with UTP cable (It could be done via wifi if you have no other option, but I always try to avoid it).
Regards
Hi Pablo,
I am also an industrial PLC programmer . You mention you have used Siemens PLC for Home automation. That is something i have also done for a few times already. I would like to ask you ; Did you install Siemens systems without a BUS between devices ?
Your comments would be much appreciate.
Regards,
M Dias
Hi Vitor.
Thank you very much for the speed and effectiveness of your response. Everything runs perfect.
I have spent my whole life programming industrial PLCs communicated by Modbus. In fact, we almost always do all the home automation with Siemens and it works perfect and more versatile and cheaper than KNX (not just air conditioning, which is typical). So, if you ever need help with this, don't hesitate to ask me.
Muito obrigado Vitor
Cheers
Hello,
Thanks to your contributions, I have successfully activated and deactivated a Shelly 2.5 module, but I cannot see its status "individually".
Let me explain: If I put this command: relay / 0 / command? I can see the status, but of ALL the information together:
["ison": true, "has_timer": true, "overpower": false, "overtemperature": false, "is_valid": true].
It refreshes well and is synchronized at all times, but do you know how I can read that information separately?
I ask you please if you can lend me a hand. By the way, it is the first time that I do something with json. It shows, right? ;)
Thank you very much, greetings!
Grande abraço Flávio, espero que estejam todos bem.
I totally forgot to mention Vitor that there's a member of ComfortClick who also speaks our alien dialect :-P
The merit goes to Vitor, I just pushed a little bit :-)
All the best
Vitor e Ricardo, boa tarde!
Excellent work with the Shelly integration.
Vitor, once you are satisfied with it, please publish this integration as an Example in our Library.
Forte abraço.
Forgot to mention. The device is able to send a HTTP command when some action is detected. Is there any way to keep listening for those HTTP commands?