DSC Powerseries NEO compability
Hello,
Is comfortclick compability with the DSC powerseries NEO?
Replies 14
Any news on DSC? Zones and PGMs are not a good solution. Would like to get more information from the system. I have HS2064 unit with TL280RE communication module.
You could always ask the installer who installed the alarm system do make those keyswitches and pgms for you. So all you have to do is control them with bOS.
No problem.
For simple 1 area arming.
You need to make a momentary(066) or maintained(067) keyswitch arm DSC input - this will be your arming output for bOS
Then you will need to make two PGM outputs - 1) Arming status 2) Alarm status. These will be your status inputs for bOS
Here is a manual https://cms.dsc.com/download.php?t=1&id=23346
This has worked for me with different alarm units. I haven't programmed any dsc's for 10 years though so...
Thank you indeed, Jürgen!
I'll try and I hope it works. I have no idea about alarms, this is my very first time. Thank you very much for your help!!
For simple 1 area arming.
You need to make a momentary(066) or maintained(067) keyswitch arm DSC input - this will be your arming output for bOS
Then you will need to make two PGM outputs - 1) Arming status 2) Alarm status. These will be your status inputs for bOS
Here is a manual https://cms.dsc.com/download.php?t=1&id=23346
This has worked for me with different alarm units. I haven't programmed any dsc's for 10 years though so...
Hi! Any new about this? I'm having huge problems with PGMs and relay stations, can't make it work. I'm in troubles because I thought Comfortclick was able to connect with every DSC alarm (I didn't read anywhere there was no compatibility with any serie before selling the installation), and my client won't pay me until I get to control this :(
Will DSC let comfortclick to control Neo series soon?
Hello,
unfortunately DSC still didn't release any API or SDK for us to implement so it's still currently unavailable.
Best regards.
Hello! A DSC provider sent to me a document to be able to connect Powerneo devices.through its API.
Maybe it could be useful for you.
Waiting for any news! Best regards!
Connected Partner Program Overview April 2018.pdf
Link to the Partner Program
Hi,
I also recommend using PGMs and zone inputs as a workaround, to Arm/Disarm and Alarm status feedback. When APIs are not available, physical connections work great for simple integration.
This is just an example, one of my costumer's bOS. It has a Paradox SP6000, and I've used a simple PGM to a binary input to get the feedback of Arm state, and and pulsed output from KNX to Arm Disarm the system.
I would also like to have native support also but after talking to DSC it doesn't look promising unfortunately. As Jürgen says using PGM ports with KNX actores you can do everything that you wany. If 2 outputs isn't enouth you can use hsm2208 to get extra PGM ports.
Hello Tanel,
as for now, DSC NEO series are not in development. We haven't gotten any active requests for the integration for NEO series and there doesn't seem to be too much interest for it at this point.
Best regards.