How to add the yamaha music cast on the bOS?
How to add the yamaha music cast on the bOS?
I have this av receiver : https://europe.yamaha.com/en/products/audio_visual/av_receivers_amps/rx-v6a/index.html
Replies 13
Dear Sir,
I have send mail to Yamaha to ask if there is an open API. Can you send and you to ask?
I'll give you some basic commands:
http://<IP>/YamahaExtendedControl/v1/main/getStatus
http://<IP>/YamahaExtendedControl/v1/netusb/getPlayInfo
http://<IP>/YamahaExtendedControl/v1/main/setMute?enable=true
http://<IP>/YamahaExtendedControl/v1/main/setMute?enable=false
http://<IP>/YamahaExtendedControl/v1/main/setVolume?volume=up
http://<IP>/YamahaExtendedControl/v1/main/setVolume?volume=down
http://<IP>/YamahaExtendedControl/v1/main/setVolume?volume=up&step=5
http://<IP>/YamahaExtendedControl/v1/main/setVolume?volume=down&step=5
http://<IP>/YamahaExtendedControl/v1/main/setVolume?volume=15
http://<IP>/YamahaExtendedControl/v1/main/setPower?power=standby
http://<IP>/YamahaExtendedControl/v1/main/setPower?power=on
http://<IP>/YamahaExtendedControl/v1/main/setInput?input=spotify
http://<IP>/YamahaExtendedControl/v1/main/setInput?input=net_radio
http://<IP>/YamahaExtendedControl/v1/netusb/setPlayback?playback=next
http://<IP>/YamahaExtendedControl/v1/netusb/setPlayback?playback=previous
http://<IP>/YamahaExtendedControl/v1/netusb/setPlayback?playback=stop
http://<IP>/YamahaExtendedControl/v1/netusb/setPlayback?playback=play
http://<IP>/YamahaExtendedControl/v1/netusb/setPlayback?playback=pause
You're welcome :)
I have been using YAMAHA audio devices for years and I sell and install them in my smarthome projects.
Found on various forums and adapted to my own needs.
I found this https://github.com/honnel/yamaha-commands and Yamaha on openhab
I found this https://github.com/honnel/yamaha-commands and Yamaha on openhab
And you don't need anything else :)
Http Yamaha RX-V481.bos
This is working on RX-V481 - I have not tested it with other models, but in theory it should work with other models too. This is my own test template so there may be some things I haven't finished.
Hello,
If they have an open API, providing command lists for sending to the device, you could use our HTTP driver to send/receive commands to the device, if the open API isn't available (which it's not in this case, i think), the integration into bOS isn't possible.
Best regards.