Hello.
I having big trouble to programming KNX over Jigsaw with ETS 6 when I test for bus it return error but I can see data on bus with diagnostic but wehn I try to program something I got error Connection closed by remote device. Have anybody similar behaviour?
Programming ETS6.0.0 and jigsaw worked fine, after upgrade ETS to 6.0.2, i have problems with programming
I’m not able to connect with ETS 6.0.4 and Jigsaw 4.9.8. There are some solution?
Hello Oscar,
we're aware of the current issue with programming using our Jigsaw and certain KNX devices. There are some tweaks required on our side, but there is issue with the latest ETS as well, which they're also working on.
Hopefully we'll be able to resolve this programming issue soon. Apologies for the inconvenience.
Best regards.
Ok, thank you for your reply. For your info, today i'm in the house and I can program throught the Jigsaw, but when i'm outside it is impossible.
Waiting for your news...
Best regards,
Óscar Toro
Hello Oscar,
do you have both TCP/UDP 3671 port forwarded for remote programming as well?
Best regards.
Hello,
I have a similar problem.
I can't access and program the KNX installation via jigsaw(v4.9.7) and ETS6 (v6.0.4 build 4543). But it worked fine until about 2 months ago. Now the jigsaw does not appear as an interface, I have to define it, and when I try to access I get the message "failed to read device description from 192.168.1.38:3671, but ping succeeded".
Could you help please?
Hello,
I am using ETS6 . I started to run Jigsaw without problems with ETS6. Except AG import with .knxprog files, but import ok with .esf files.
Have a nice day
JPS